How to Draw a Steam Train for Beginners

Many people travel by train today. It makes it easier to travel from one place or another. Trains can transport more people than other vehicles because they are connected.

A railway is a separate passage for trains. Without it, the train can’t run. Rails are made from steel rails and strong enough to allow a train wheel or car to move on them. They were originally made from wood or iron in the early days. Modern trains are equipped with power lines, which make them run faster.

Here are some steps to help you draw your favorite train if you are one of the kids who love to draw them.


Below is a step-by-step drawing tutorial.

Step 1: Draw your body
Let’s get started drawing our favorite steamship. The hull is the first thing that you should draw. A hull is a place where people can ride and sit. Draw a rectangle at the center of your paper.

Step 2: Draw the control panel
This is a very important part of the ship. Here is the train operator. This is what makes our train run. Draw the control box accurately. Draw half of a box on the left-hand side of the rectangle or body.

Step 3: Draw the front
Let’s now draw the front of our train. Are you familiar with the turtle shell? If you have, draw a turtle shell on the right-hand side of the rectangle. Be sure to leave space in the front. Next, draw the smaller square on the left side.

Step 4: Remove redundant lines
Remove any lines not needed in your train build after you have created the control box. Remove the lines connecting the control box to the front area and the vertical line connecting the turtle shell and hull.

Step 5: Draw the big wheel and window
Let’s now draw the controller window. In the center of the control box draw two small boxes approximately 1 inch apart. Draw a large circle that overlaps the left side of your hull. The edges and another large circle are approximately 1 inch from the previous large circle.

Step 6: Draw the little tires
There are both big and small cakes. These should be at least two inches longer than the larger wheels. Two small circles should be drawn in front of your train. The small circle should not touch the bodice. They should be at least 1/2 inch apart.

Step 7: Add chimney to roof
To protect our driver, it is important to add a roof to the control box. Draw a horizontal line 1″ from the control box to draw the roof. The horizontal line must be equal in length to the control box. Draw a diagonal line along each side of the horizontal line. Next, draw a small horizontal link to connect it with the control box. The same process is repeated on the opposite side.

Next, draw a vertical upward rectangle in the front. This is our fireplace. The box’s upper body has a turtle shell on it. It is located between the controller and the chimney. Your control box will have two windows. Add a curve to the top.

Step 8: Add Front and Metal Barrs
Let’s add some metal to the front by drawing a semi-triangle connecting to the area in front. To help the wheels move together, place a rod under the wheel. You will need to place the rod behind the wheel, and tie it to the hull. On top of the vertical rectangle that you have drawn earlier, add a horizontal rectangle. This is the fireplace. Remove the lines between the box and the curve in your viewport. Make your window look better.

Step 9: Add more details
Let’s make this train look more appealing by adding some details. Begin with the roof. Draw a connecting curve along the horizontal line connecting it and the control box. Then, create two thin rectangles that are very long inside your train. This can be found at the bottom left corner of the control box. A semicircle should be added between the controller’s chimney and the control box. To ensure identical dimensions, divide the carriage front triangle in the lower section into three parts.

Step 10: Add the details to the wheel
Let’s make our wheels stand out by drawing a smaller circle within each wheel. To make your circle perfect, you can use centavo coin. Make three curves on the hull. Start at the front, and measure the distance. Each curve should have a gap of 1 inch. To join the three metal facades, add a metal rod.

Step 10: Add the details to the wheel
Let’s make a small circle within each wheel to emphasize the wheels. To make your circle perfect, you can use centavo coin. Make three curves on the hull. Start at the front and measure the distance. Each curve should be 1 inch in diameter. To join the three metal fronts, add a metal rod.

Step 11: Add Rods & Lines
Now you are almost done! You are almost done! Next trace the object inside two large circles. You will need to find another object that is smaller and rounder than the ones you made earlier. Track it inside the wheel. Double the 3 curves that you have drawn in the train’s body.

Step 12: Done!
You will have the opportunity to color your train with your favorite colors. Your creativity is my trust. You can do it. After coloring the train, you can show it off to your family. Stick it in your room or home to show others how talented you are at coloring and drawing. Keep it up!

Leave a Comment