It is possible to refer to the basic step-by step drawing guide that follows
How To Draw A Dump Truck Step by Step
Step 1
For the first part of the guide on drawing the hammer, we’ll begin with the top of the hammer, which is the most crucial part.
The head’s one side has a flat “face” of the hammer, which handles the actual hitting. The other end has bent claws that can be employed to remove nails as well as for other uses.
We will cover with both of these elements in the initial step that we will cover in the tutorial. The hammer’s face has an extremely thin base that extends over the larger part of the surface.
The surface is also slightly curving, and will also feature a border that is close to the surface.
Then, draw the body’s top to hold the hammer, follow with some curves that go back to the hammer’s base.
Step 2 – Draw more heads for hammerheads
Following this hammer drawing and adding some more details to the head of the hammer. The first step is to use more curving lines to draw the other half of the claw, which will be the top.
This angle can make it possible to see the more flatter side of the claw as seen in the images of reference.
You can then use a few additional curves to form your base hammer head , and then use an extended line to mark the beginning of the right edge of your handle. It’s now time to move to step 3 . of the guide!
Step 3: Draw the remainder of the handle
In the third stage in our drawing a hammer instructional in which you’ll finish the outline of the handle to draw the handle for the hammer. Begin by drawing a flat oval to form the base of the handle, directly below.
We’ll follow a different long curving line, moving from the oval towards that top end of Hammer.
Hammer handles is an unusual form and you should try to replicate it in the same way as in our reference picture.
After that then we’ll add some textures when we continue.
Step 4: Next sketch the specifics for the handle of the hammer.
Hammer handles are typically constructed from wood, and we’ll include some texture to showcase this in the fourth step of drawing a hammer.
To give the appearance the grain of wood, we make patterns of layers on the handle of the wood. Begin by drawing a lengthy thin, thin design with sharp ends at the center on the handle.
Then you can surround the shape by larger models of it surrounding the shape. Then draw three designs by drawing a long line at the center of the first.
Then we can proceed to step 5, which will finish the grain pattern, as well as any other details that are needed.
The 5th step is to add the last details to your hammer’s drawing
We’ll finish up the texture details as well as every final stroke during this stage of our hammer drawing tutorial.
To enhance the wood grain look of the handle, we’ll create more curves on the handle in the direction of the designs you sketched earlier in this step.
The majority people will be able to see a smooth curve however those closer to the source will have a more sharp shape to them.
After you’ve completed the wood grain detail, you are able to add additional specifics of your own!
One suggestion is to eliminate the wood grain effects , and instead, paint an effect of rubber sleeves on the handle.
You could also draw a background in order to show the project that this hammer is employed in. What do you think you can do about the best way to finish this?
Step 6 – Finish your hammer’s drawing in the color
This is the last step of your drawing of a hammer and it’s the time to finish with a bit of colors. In our image of reference we’ve kept the colors somewhat more authentic.
We chose brown for the handle made of wood, and we then used gray to finish the metal end of the hammer.
You can choose shades that look like these, but don’t be afraid make your own colors!
Once you’ve settled on the color scheme, you’ll select the medium and tools you’ll be using to create them. We’re excited to find out what colors you pick!
